Do you spin?

[Andrimus]

Probably a bit of both

Well, until I see photographic evidence I will assume that you just superglued a couple of tacs to a coke bottle cap and you're calling that your stubby.

Well next smoke session is 31 . I will put the picture in rotablade face ,it's easier.
Mean while
https://www.facebook.com/MissKloseBBQ/?ref=ts&fref=ts

 

[Darkbulb]

Well next smoke session is 31 . I will put the picture in rotablade face ,it's easier.
Mean while
https://www.facebook.com/MissKloseBBQ/?ref=ts&fref=ts

Mmmnmmmmmmmmmmmm

 

[Andrimus]

Brisket is way off life.
No wegans here

 

[Darkbulb]

Took the brass ZeroFeud Tri spinner with me today on some last minute errands and meeting up for some drinks downtown. Lovely fidget spinner!

 

[Darkbulb]

Maybe the best pro-spinner argument ever

 

[Northam Saint]

On the printer we have a spinner !

 

[Darkbulb]

On the printer we have a spinner !

Woot!

 

[Northam Saint]

Woot!

Printed off nice, but, it needed sanding to fit the bearing in. I got the dremel to it, too much friction, it's melted a little. Never mind I'll try again.

 

[Betriebsarzt13]

Printed off nice, but, it needed sanding to fit the bearing in. I got the dremel to it, too much friction, it's melted a little. Never mind I'll try again.

Had the same issue with a couple of my prints, i used metal sandpaper 240... only thing i had at hand.

I Found the 2 arm spinners to be less fun then the 3 or 4 arm versions.

Gesendet von iPhone mit Tapatalk

 

[Northam Saint]

Had the same issue with a couple of my prints, i used metal sandpaper 240... only thing i had at hand.

I Found the 2 arm spinners to be less fun then the 3 or 4 arm versions.

Gesendet von iPhone mit Tapatalk

I'm doing a reprint as I type. I've had a couple of fails but I'm new to this game so I expected a few duff ones.

 

[Darkbulb]

I'm doing a reprint as I type. I've had a couple of fails but I'm new to this game so I expected a few duff ones.

Apart from spinners what else is in your production queue?

 

[Northam Saint]

Apart from spinners what else is in your production queue?

Scout woggle different spinner, used blade box, razor stand.

This came out rather well.

 

[Darkbulb]

Scout woggle different spinner, used blade box, razor stand.

This came out rather well.

We're living in the future

 

[Northam Saint]

Back to spinners, made this little top.

 

[Northam Saint]

Lovely print, bearings fitted in nice and tight, goes well too.

 

[Darkbulb]

Lovely print, bearings fitted in nice and tight, goes well too.

Wow, great job - don't think I've ever seen a printed tabletop spinner.
The hand spinner looks like you could throw it up on eBay/Etsy right away if you so choose. Well done indeed.