- Joined
- Thursday August 27, 2015
I posted it as an example of a type. In practice, I would use a twist lever similar to that found on the PAL adjustable (the one that controls the adjustment), with a cam about the same size as that knob.its a helpful thought but remember, the blade can only take so much tension. And that piece of machinery you posted a picture of, probably weighs 2 kilograms..... and most on here say 50-70 GRAM razors are heavy....
I have been stuck on one design concept for a razor for maybe 2 years now. The idea is as complicated as taping a razor blade to a chop stick, but in actual planning and drafting, because of one spot on the razor, its as complicated as trying to assemble a fat boy while blindfolded.
If you won't use the idea, maybe I will.
The spring design is only there to facilitate using a blade injection key. Ditch the key, and there are many, many different ways you can use to hold the blade in place.