- Messages
- 329
- Location
- near Glasgow
I have started to put a dot from fine felt pen on blade to count number of uses. I also have a row of very small magnets on shelf edge which I stick other in use blades to for easy view.I do it all the time, use it, clean it off after, dry it, wrap it back up and the next shave it'll be in a different razor
ditto.I do it all the time, use it, clean it off after, dry it, wrap it back up and the next shave it'll be in a different razor
Iv never used Sanitiser on used blades or felt the need.I swap blades around as well. I thoroughly clean and dry razor & blade after every shave.
Another thing I do these days with used blades is to run a drop of hand santizer down the edge of the blade when its in the razor a minute or two before shaving. I don't rub it in or anything like that, just let it drop on the blade and trickle along the edge.
At least in my own mind it helps eliminate any possible bacterial build up while the blade's been sitting around.
It might sound like overkill ( no pun intended ) but in the past I noticed I was getting more weepers and cuts with used blades than with new ones and it wasn't for lack of cleaning.
I've noticed a big difference since using the sanitizer on used blades.
Mine Get Dried & go back in the packet but good device there
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?