Help, im computer dense...

soapalchemist said:
P.S. it's this bit that had me stumped 'Now you have to have a pic size 125 by 125 pixels max, and saved as a JPEG and no bigger than 97.66 KB.'
Click to expand...

Yes comes across a bit like this don’t you think;

Launch:
Panel Action 1
T-1:39:00 O5 Activate commanders communication system
Set XMIT ICOM to VOX/VOX
Set both A/G, A/A and ICOM to T/R
Set POWER to AUD/TONE
---------------------------------------------------------------------------------------------
T-1:34:00 O9 Activate pilots communication system
Set XMIT ICOM to VOX/VOX
Set both A/G, A/A and ICOM to T/R
Set POWER to AUD/TONE
---------------------------------------------------------------------------------------------
T-1:20:00 F6 Abort light for 8 seconds
---------------------------------------------------------------------------------------------
T-1:10:00 // Side hatch secured
---------------------------------------------------------------------------------------------
T-1:05:00L2 cabin leak check
Set CABIN VENT ISOL to CLOSE
Set CABIN VENT to CLOSE
---------------------------------------------------------------------------------------------
T-0:50:00 // Pilot confirms IMU alignment
---------------------------------------------------------------------------------------------
T-0:49:00 R2 Boiler checks
Check BOILER POWER 1/2/3 is ON
Check BOILER N2 1/2/3 is ON
Check BOILER CNTLR/HTR 1/2/3 is on position A
---------------------------------------------------------------------------------------------
T-0:31:00 C3 Backup flight control
set BFC CRT DISPLAY to ON
Check BFC CRT SELECT to 3+1
Keypad ITEM 25 EXEC

Panel Action 2
T-0:30:00 C3 OPS
keypad OPS 9 PRO
L2 Cabin vent
set CABIN VENT ISOL to OPEN
Set CABIN VENT to OPEN
---------------------------------------------------------------------------------------------
T-0:25:00 // Voice check
---------------------------------------------------------------------------------------------
T-0:21:00 L2 Cabin vent
set CABIN VENT ISOL to CLOSE
Set CABIN VENT to CLOSE
---------------------------------------------------------------------------------------------
T-0:20:00 C3 Load OPS 1
keypad SPEC 99 PRO
keypad OPS 101 PRO
---------------------------------------------------------------------------------------------
T-0:16:00 R2 Helium pressure of MPS
Set MPS He ISOLATION A to OPEN
Set MPS He ISOLATION B to OPEN
Set PNEUMATIC He ISOL to OPEN
Set all 6 ENGINE POWER to ON
---------------------------------------------------------------------------------------------
T-0:14:00 F6 Abort light for 8 seconds
---------------------------------------------------------------------------------------------
T-0:09:00 C3 Hold timer set
set TIMER THUMBWHEELS to 0900
Set TIMER to SET
Check EVENT TIMER MODE to DOWN
Check EVENT TIMER MODE CONTROL to START

Mission Readiness Checklist:
Panel Action 4
T+0:02:07F7 SRB separation
Check OPS CRT DISPLAY
Check SRB combustion chamber pressure < 50PSI
---------------------------------------------------------------------------------------------
T+0:04:30// NEGATIVE RETURN
---------------------------------------------------------------------------------------------
T+0:08:41F7 MECO
check MAIN ENGINE LIGHT STATUS is RED
O8 set FWD RCS He PRESS A/B TANK ISOL 1-2/3-4-5
to OPEN
set MANIFOLD ISOL 1-2/3-4-5 to OPEN
---------------------------------------------------------------------------------------------
T+0:09:00C3 External tank separation
---------------------------------------------------------------------------------------------
T+ET sepC3 prepare for OMS burn
To OMS brun keypad: OPS 105 PRO
keypad ITEM 22 EXEC
F6 check CSS on AUTO
C3 Check DAP on AUTO
keypad ITEM 27 EXEC
Set OMS ENG LEFT/RIGHT to ARM/PRESS
O14 set L OMS ENG LEFT/RIGHT to ON
O16 set R OMS ENG LEFT/RIGHT to ON
// MNVR 27 clear on finish
C3 keypad ITEM 23 EXEC
F4-F2 set BODYFLAP INDICATOR to OFF
R2 set all 6 ENGINE POWER to OFF
Set He ISOLATION A LEFT/CTR/RIGHT to GPC
Set He ISOLATION B LEFT/CTR/RIGHT to GPC
Set PNEUMATIC He ISOLATION to GPC
R4 set H2 PRESS LINE VENT to OPEN
check DOOR INDICATORS on CLOSED
 
I'm getting a PM off Sharon and you bums ain't

-bumptee bump bump bump-

I'm getting a PM off Sharon next week and you bums ain't

-bumptee bump-

(to the tune of "Jerusalem")
 
cheese_dave said:
RB73 said:
Yes comes across a bit like this don’t you think;

Launch:
Panel Action 1
T-1:39:00 O5 Activate commanders communication system
.
.
.
Click to expand...
Is that a Space Shuttle launch sequence?
Click to expand...

Yes indeed, but i found after the 3/4 launch it gets alot easier..... :roll:
 
Just remember folks, a standard screen only displays images at 72dpi.

If you print an image on a standard 300 dpi printer that very same image is going to be over four times the size when you display it on screen.
 
You must log in or register to reply here.
Back
Top Bottom