Received this little beauty today. Another custom brush from Bill. "The Le Tuft Heavy Metal Brush"
I asked Bill to create a brush based on the guitar wielded by ex Ozzy Osbourne lead guitarist and Black Label Society frontman Zakk Wylde.
Here's what Bill came up with.
It's made up of segmented sections of faux ivory and ebony acrylic, steel rod and silver sheet between each segment. It stands 47.5mm tall and is 37.5mm wide at the shoulder. The knot is a 26mm 2-band finest set at approximately 50mm.
These pictures are from Bill, taken before some final work on the base, before the knot was set and before the final polish. I'm sure you'll agree even before completion it looks frigging ace.
And here's the completed brush, it's been hand sanded through 21+ stages before being polished up to it's current gloss. The off white of the ivory matches the guitar perfectly.
Post bloom pictures to follow when Mrs Cubert returns with my camera.
I asked Bill to create a brush based on the guitar wielded by ex Ozzy Osbourne lead guitarist and Black Label Society frontman Zakk Wylde.
Here's what Bill came up with.
It's made up of segmented sections of faux ivory and ebony acrylic, steel rod and silver sheet between each segment. It stands 47.5mm tall and is 37.5mm wide at the shoulder. The knot is a 26mm 2-band finest set at approximately 50mm.
These pictures are from Bill, taken before some final work on the base, before the knot was set and before the final polish. I'm sure you'll agree even before completion it looks frigging ace.
And here's the completed brush, it's been hand sanded through 21+ stages before being polished up to it's current gloss. The off white of the ivory matches the guitar perfectly.
Post bloom pictures to follow when Mrs Cubert returns with my camera.