- Messages
- 2,507
- Location
- Brighton
I have a couple of these razors and both have the well known cracks in the handles. How can you stabilise the cracks, I have googled this but most of the info is on US sites and they tend to use brand name stuff that is not available over here.
Any one done this and if so how and what with, I should add both razors are easily dismantled and the crack/split is at max 1 1/4 " long. Also as they are both made around 1916/1930 and in good order I just want to make sure they don't get any worse.
Any one done this and if so how and what with, I should add both razors are easily dismantled and the crack/split is at max 1 1/4 " long. Also as they are both made around 1916/1930 and in good order I just want to make sure they don't get any worse.