Jeltz Joined Monday January 4, 2010 Location Wiltshire Sunday February 28, 2010 #1 I know that many of you guys use several razors in rotation, but do you use 1 razor blade at a time swapping it from razor to razor or do you load it in one and use it in that razor on the occasions you choose to use that razor.
I know that many of you guys use several razors in rotation, but do you use 1 razor blade at a time swapping it from razor to razor or do you load it in one and use it in that razor on the occasions you choose to use that razor.
IanM Joined Wednesday August 12, 2009 Sunday February 28, 2010 #2 None of the above really, as I don't let the blade get blunt. I often change razors when I change a blade. I sometimes swap a blade between razors. Ian
None of the above really, as I don't let the blade get blunt. I often change razors when I change a blade. I sometimes swap a blade between razors. Ian
Blyth Spirit Joined Tuesday September 8, 2009 Location North of the Wall but South of the Frontier. Sunday February 28, 2010 #3 +1.
M Manx Man Joined Saturday January 30, 2010 Monday March 1, 2010 #4 As I'm going thru a sample pack I change the razor after one shave, blades can act differently in different razors :shave .
As I'm going thru a sample pack I change the razor after one shave, blades can act differently in different razors :shave .
Blyth Spirit Joined Tuesday September 8, 2009 Location North of the Wall but South of the Frontier. Monday March 1, 2010 #5 The shaves can be completely different between shaves 1 - 4 from the same blade (and razor combi) too. I'd go for the blade life cycle rather than speed I think...
The shaves can be completely different between shaves 1 - 4 from the same blade (and razor combi) too. I'd go for the blade life cycle rather than speed I think...
Smell The Glove Joined Saturday December 19, 2009 Location Ayrshire Monday March 1, 2010 #6 I don't have much of a rotation. I shave with two of my three razors, and favour one over the other. If I'm using my second choice razor then will just see the blade through 'till the end of it's use.
I don't have much of a rotation. I shave with two of my three razors, and favour one over the other. If I'm using my second choice razor then will just see the blade through 'till the end of it's use.
fozz77 Joined Monday July 13, 2009 Location Hobart Monday March 1, 2010 #7 I use several different razors. The blade stays with the razor until it is done. I also use different blades, variety and all..
I use several different razors. The blade stays with the razor until it is done. I also use different blades, variety and all..
Arrowhead Joined Wednesday August 5, 2009 Location West Yorkshire Monday March 1, 2010 #8 Same as Fozz.
OP Jeltz Joined Monday January 4, 2010 Location Wiltshire Monday March 1, 2010 Thread Starter #9 Very interesting, thanks for the replies.