Not sent from a Chinese made electronic device I pray. This lefty recognizes certainly realities of international capitalism.Some ridiculously cheap prices on these on Aliexpress so I am tempted. I may hold back for ethical reasons though. There is a reason that Chinese stuff is so cheap. They treat their workers like sh*t. Not appealing to a good leftie like me.
Ming Shi and Q Shave are the same razor different package. Epacket shipping from QShave in China is reliable.Where can you get the best deal?I'll give Aliexpress a miss as I am done with shipping from the US. What is the difference between this and the mingying or whatever it is called?
I had a misalignment on one of my Qshaves. Half the time, the blade exposure was uneven, sometimes even unsymmetrical. I noticed that it was because I used to load the blade in the cap first and then clip it with the handle. Placing the blade on the blade holder first in lieu of the cap solved the misalignment problem.
I haven't noticed this on mine and I thought I'd checked. I'm away from home at the moment but I'll recheck when I get back. I feel mine shaves fine BTW. Keep us in the loop about the springsOK, I've looked at this blade alignment situation.
Both mine and my sons Q Shaves have blade alignment differences in both directions (shaves closer on one side of the head, and gap difference from one end of the blade to the other)
The blade plate rocks around in both directions, even on low settings.
I took the clone and my Futur apart, and swapped the Futur spring into the clone.
Hey presto !!! The blade plate was perfectly stable and there was no blade gap difference or movement of the blade plate.
The clone spring isn't nearly as strong as the one from the Futur.nk
I'm going to try to source suitable springs for the clones.
I hope this will help others who have the blade gap difference with their Futur clones.
I haven't noticed this on mine and I thought I'd checked. I'm away from home at the moment but I'll recheck when I get back. I feel mine shaves fine BTW. Keep us in the loop about the springsOK, I've looked at this blade alignment situation.
Both mine and my sons Q Shaves have blade alignment differences in both directions (shaves closer on one side of the head, and gap difference from one end of the blade to the other)
The blade plate rocks around in both directions, even on low settings.
I took the clone and my Futur apart, and swapped the Futur spring into the clone.
Hey presto !!! The blade plate was perfectly stable and there was no blade gap difference or movement of the blade plate.
The clone spring isn't nearly as strong as the one from the Futur.nk
I'm going to try to source suitable springs for the clones.
I hope this will help others who have the blade gap difference with their Futur clones.
OK I've checked the blade gap on mine it looks fine though I don't have an accurate way to measure it. I've not had issues with blade changes, but I'm always ultra careful when handling blades.I haven't noticed this on mine and I thought I'd checked. I'm away from home at the moment but I'll recheck when I get back. I feel mine shaves fine BTW. Keep us in the loop about the springs