Active Wolfman WR3 pass around

Got my allocation for a Wolfman wr3. And the whole blade gap / feel of the razor is doing my nut in.

Has anyone got a simple answer for a comparison in terms of what is Wolfman compared to sabre plate 1 / 2

Wolfman plate would be ….. compared to sabre plate 1.
Wolfman plate would be ….. compared to sabre plate 2.

Any help with this would be great fellas. Thanks.

J
 
.40 or standard gap for me is like Sabre L2 for efficiency but smoother. I did a direct comparison with the prototype during the pass around.

I've not tried a smaller gap in SB so hard to say for L1.

Blade exposures from Wolfman:

.25 = 0
.30 = 0.025
.35 = 0.05
.40 = 0.07
.45 = 0.10
.50 = 0.12
.60 = 0.15
 
.40 or standard gap for me is like Sabre L2 for efficiency but smoother. I did a direct comparison with the prototype during the pass around.

I've not tried a smaller gap in SB so hard to say for L1.

Blade exposures from Wolfman:

.25 = 0
.30 = 0.025
.35 = 0.05
.40 = 0.07
.45 = 0.10
.50 = 0.12
.60 = 0.15
Im thinking of playing safe and to be in the fence .30 plate
 
Probably not to far off as I think they increased the gap from about from 0.6 to 0.9 between the L1 and the L2, I could never find specifics for the exposure.

Agree with @Masamune there was no danger with the 0.40SB, it was smoother than the L2 whilst maintaining the efficiency. I actually went up rather than down and opted for the OC.
 
Back
Top Bottom