- Messages
- 565
- Location
- Fife, Scotland
I bought one of these off the 'bay before I realised that they were made for a special sized blade. One with three holes. I found that by snapping off the 4 points of the end holes on a standard blade made them fit a Wardonia. The points break off easily if held with a pair of pliers and bent over with a screw driver. It only takes about a minute.
Care has to be taken when tightening the handle. There is a little movement of the blade so make sure it is seated centrally whilst tightening. The resultant shave is fine. I found the razor a bit light for my liking (its made of Bakelite). However, if I'm in the mood I do use it
[attachment=1]
[attachment=0]
Care has to be taken when tightening the handle. There is a little movement of the blade so make sure it is seated centrally whilst tightening. The resultant shave is fine. I found the razor a bit light for my liking (its made of Bakelite). However, if I'm in the mood I do use it
[attachment=1]
[attachment=0]