They look halfway decent now.

Messages
2,103
Location
Cat-Pig Swamp
As recieved.

100_2832 (2).JPG



Took the tube from the '20's ball-less ball-end and put it on the nekkid '20's Single Ring.

100_2836 (2).JPG



Cleaned them some and;

100_2911.JPG
 
OP
TobyC
Messages
2,103
Location
Cat-Pig Swamp
Good result. Any cracks in the handles or bad brassing on the top plates?
The top of the cap on the gold one is bare brass, the previous owner "cleaned" it with something rough, so I polished it. The tube on that same razor was silver plated and cracked, I soldered the cracks from the inside and scrubbed away the silver so it's all gold colored at least.
The silver plated one is perfect.
 
OP
TobyC
Messages
2,103
Location
Cat-Pig Swamp
They do! Nicely done. You should be quite proud (y)
Thank you Paul. (y)
I am very happy, they have perfect teeth, the heads have no frown, dead straight, and they were dirt cheap. I was pleasantly surprised with the plating on the silver plated one, it's very close to perfect.
 
Top Bottom