+ 1 to that ,maybe a spare Screw Bolt too [ JIC
+ 1 to that ,maybe a spare Screw Bolt too [ JICIm in much the same mind, the dot 3 plate is very good indeed and copes very well but as you say it would be a very welcome addition if it was to come to market and I to would certainly buy one.
Unless you can get hold of som NOS blades Schick are probably the best to use although some find the stock blades that come with the razor work just fine.I have a supply provision with all the heads in the mail and my experience with injector's is limited to an E4 and G schick with the Schick blade for Connaught. I don't have a problem with this blade, but any suggestions about different blades would be appreciated.
I'd like to put it to the test against the V1 Oneblade razor.
Mine is a used one, so it doesn't come with blades. At the SP page there is no marking on the blades, so what are they?Unless you can get hold of som NOS blades Schick are probably the best to use although some find the stock blades that come with the razor work just fine.
They are Personna blades.Mine is a used one, so it doesn't come with blades. At the SP page there is no marking on the blades, so what are they?
Thank you, Connaught carries them as well as the Schicks.They are Personna blades.
I don't think Connaught stocks Schicks any more....unless things have changed.Thank you, Connaught carries them as well as the Schicks.
Right you are. I mentioned Connaught because I bough a magazine of Schicks last year and assumed they still carry them, alas they have been discontinued.I don't think Connaught stocks Schicks any more....unless things have changed.
The best place to purchase Schicks is from Mr medical from the U.S. Amazon...cheapest I've found.Right you are. I mentioned Connaught because I bough a magazine of Schicks last year and assumed they still carry them, alas they have been discontinued.
I have a heavy beard growth and found even on plate 3 the Personnas are pretty ineffective, and do not do the Razor justice. Go for SchicksThank you but the import tax is prohibitive, so I'll try the personna's which are easily accessible.
Works well, worth a go!If you want, you can modified AC blades and put it in Supply. I didnt try it yet, but i will
Poslano sa mog EVA-L19 koristeći Tapatalk
You must try a Chick, IMHO much better. Am going to use it Today !
I await your views,I don't doubt it one bit. Don't get me wrong, I am not a fan of the Personnas. I have just been trying to use up the 30 something I have left.
What I am most excited to do is put a nipped off AC blade in it.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?