- Messages
- 2,094
- Location
- Out of off of Chorley
fancontroller said:I was wondering about cleaning having just acquired an Injector razor.
...
So how do you clean it?
...
What's your story?
Fergiebilly said:Yeah, Paul is on the case here, sound advice....:s
There always be the exception to the rule, but it would appear most folks as per "Schick's user instructions" just rinse the razor and leave the blade in the razor between shaves.....
I personally don't see the point in removing a blade after every shave to clean a razor.....The more the blade is being extracted, handled and re injected and re - handled the more likely that the blade is going to be prematurely blunted, not to mention the wear and tear on the razor itself....Schick "do not" recommend these practice's anyway.....
The Schick Instructions Manual recommends that the razor should be thoroughly rinsed under the tap....I personally blow air through the side of the head after rinsing with Hot Water to expel anything left inside and the rest should evaporate due to the heat.....Injector blades are Stainless Steel and although not totally rust proof are generally fine to be left in the razor for extended periods of time..... Some of the Schick Injector Sets came with a thin wire handled nylon Brush that is designed to push through the side of the head to clean it without removing the blade.....A wooden tooth pick would work fine as well......:icon_rolleyes:
I have a spare one if you want it.... PM me with your address and I will post it to you......No cost.....:icon_mrgreen:
The Schick Injector System is quite perfect and quite ingenious in its simplicity.....
Best to keep it simple......:icon_razz:
Billy
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?