El Jefe SE razor

Looney12345 said:
All windrose handles are meant to be fine with this head... I've received mine today so will post some pictures of the head in top of my three handles and see if there are any others it is compatible with as well!
Click to expand...

I should probably clarify, that my problem isn't the length of the threads, it was that the threads were rough enough that several of my handles that work fine on other heads (including Shavecraft) didn't want to thread onto the El Jefe. I believe that is a more hit or miss problem, because not everyone has had the issue, but I have read of several other accounts besides mine.


Sent from my iPad using Tapatalk
 
Ah gotcha. I'll be having a play soon. Will report back!
 
So I received my El Jefe head today and thought I'd share a couple of pictures of different handles... I had 6 handles to attempt to plonk this head on top of... Only two worked, both of which were Windrose and weirdly one of the other 4 was also a Windrose and that didn't work! It got to a few mm from being able to tighten and didn't want to go any further and I wasn't about to force it knowing how fragile the thread is. The other 3 wouldn't even screw on a turn, they just didn't accept the thread at all.

Anywho, some pictures below;

The line up of handles, left to right;

Assassin (upside down ), Rocnel, Windrose Z1, Windrose H3, Windrose H5, ATT Atlas



Now the two that it worked with, first the H-3







Then the Z1





 
 
You must log in or register to reply here.
Menu
Log in
Register