can this watch strap be altered

I have a watch that a freind brought back from a far away place that is a homage to a famous watch. I have just got it working.

However it is on a bracelet that is far to big for me.
One side there is holes and the otherside looks to be flush though I can see a circle which I'm taking to be the other end of the pin.
[attachment=10766]
[attachment=10767]

I cant see any little arrows on the underside of the strap.

Does this look like I'd be able to change it myself.
Or if i take it to a local Timpsons or similar would they do it. Im not sure how thngs work with it been a replica

If it's got pins it can be altered. Take it to Timpsons or wherever - there's absolutely no reason why will refuse to do it.

Yeah they will do that for you. I've done one myself before but they are slightly harder than the normal pins.

You can buy a cheap tool off eBay to diy.

Now if I recall, when you look inside the strap there are gaps where you push the pin out from. Once you have prised them out a bit you need a pair of small pliers and you can then pull them the rest of the way.