Using an SE

Messages
2,304
New to forum just acquired Oneblade Genesis (awaiting delivery).
Have read about Schick Proline blade it would seem highly recommended SE.
I don’t understand what is meant by “20’s are for injectors and the 30’s are for AC”.
Could you please explain and which is correct for Oneblade ?
Thank you John
Neither Schick blades will fit into the Oneblade.

The Schick Prolines 30's will fit into a razor that uses Feather Artist club compatible blades such as a Blackland Vector, General, Cobra, King Cobra or Mongoose.

The 20's are Injector blades that fit in Schick Injectors or the Supply Provision.
 
Messages
2,893
Location
Kent UK
Neither Schick blades will fit into the Oneblade.

The Schick Prolines 30's will fit into a razor that uses Feather Artist club compatible blades such as a Blackland Vector, General, Cobra, King Cobra or Mongoose.

The 20's are Injector blades that fit in Schick Injectors or the Supply Provision.
The Schick Proline Blades actually are AC blades and come in Two Sizes Type P are the longer and fit the modern
SE Razors these can come dispenser with 20 or30 blades.
The Type B are also AC blades but very close in size to Injector blades, a few of us tried them with sucess , I so far have only found TypeB in dispensers with 20 blades.
In a nutshell Type P can be used in most modern SE Razors designed to take AC blades.The shorter Type B have found a use in Vintage Injectors and the Supply SE
 
Messages
573
New to forum just acquired Oneblade Genesis (awaiting delivery).
Have read about Schick Proline blade it would seem highly recommended SE.
I don’t understand what is meant by “20’s are for injectors and the 30’s are for AC”.
Could you please explain and which is correct for Oneblade ?
Thank you John
Hello @JohnT, welcome to the forum.

As has been said, none of the blades you mention will fit the Oneblade. The only blade that fits is the Feather FHS blade, which the Oneblade was designed to work with.

Other blades are the GEM single edge blades however the spine needs to be removed from each blade or it will not fit.

Hope this helps. [emoji1303]
 
Messages
4
Hello @JohnT, welcome to the forum.

As has been said, none of the blades you mention will fit the Oneblade. The only blade that fits is the Feather FHS blade, which the Oneblade was designed to work with.

Other blades are the GEM single edge blades however the spine needs to be removed from each blade or it will not fit.

Hope this helps. [emoji1303]
Many thanks I understand will get some feather FHS.
 
Messages
871
Location
Reigate
New to forum just acquired Oneblade Genesis (awaiting delivery).
Have read about Schick Proline blade it would seem highly recommended SE.
I don’t understand what is meant by “20’s are for injectors and the 30’s are for AC”.
Could you please explain and which is correct for Oneblade ?
Thank you John
Sorry to have missed this. I am nowadays an infrequent visitor. Neither of these blades will fit the OneBlade. It is an excellent razor but it only really takes the feathers FHS'10.

Injector razors such as the schick and the supply take the B20 whoch is a smaller blade. Artists Club razors such as the Cobra, Mongoose, Black Hawk, Occams, and others take a larger blade and the P30 fits them. And makes for a fabulous shave!

And whilst I do love the OneBlade I can only get 2 or 3 shaves out of those FHS-10 blades.
 
OP
Satanfriendly

Satanfriendly

Supporter
Supporter
Messages
2,049
Location
Liverpool
And whilst I do love the OneBlade I can only get 2 or 3 shaves out of those FHS-10 blades.
Probably about right but I do find with a bit of palm stropping I can get 5 or 6 shaves from a blade. Depends on the blade though as they are quite inconsistent in quality.
 
Top Bottom