3one6 user experience

The only Cardinal rule of shaving: NO PRESSURE. Shave off the lather, the stubble will follow.
Steve,

Yes, this is what I was trying to do and that is why I was surprised that I got a nick this morning. I mean there was no pressure at all, I didn't even think the razor touched my face and it bled. Obviously, I am doing something wrong and I am taking this 3one6 as a personal challenge to not let it beat me!
Cheers. :)
 
I think if I had used it like my DE89, I would probably have nicked myself. I actually kept your write-up in mind and just took a slow paced pressure free shave. I noticed how much growth the WTG pass took off and thought I could get away with an ATG pass and touch-ups.

Do you get your nicks when you're going in for touch-ups in certain areas or during the strokes of your passes?

Also, whilst I know you can never blame a blade, have you ever used a Gillette Silver Blue? They're my go to blade in any new razor. There's a reason they have a huge fan base. Could be worth giving one of those a try? I sometimes wonder of the psychology associated with using different blades subconsciously affects our technique.

Sent from my LYA-L09 using Tapatalk
Boycie83,

I have tried several blades now: Feather to start with because this blade works so well in my DE89, Gillette Yellow, Personna Red Israelie, and a Merkur.

Now think about that last blade, a Merkur. I even managed to cut myself with one them and they are considered one of the least sharp blades on the planet. It is very frutrating.

Some weepers have happened below the edges of the mouth, but I haven't had one of those now for a few days. However, where I do get cut, every time, is on the tip of the chin. I know this is a difficult area for many, but again, I can shave there with the DE89 sporting a Feather blade and not give it a second thought.
 
Stay away from Merkur and Muhle blades. You may as well use a cheese grater on your face. Watch your angle. I don't know where you nicked yourself, but if it was the chin area, you're among many. The chin is a notorious area. You really have to watch yourself. Give it time. Your technique will improve, and you will eventually find a blade that won't leave your face looking like an Old Testament sacrifice.
 
Just got back from the hospital today and looking forward to trying mine on Monday morning as I tend to shave every two days given that I don't go into an office or customer facing environment anymore. That and the fact that DE gives closer, longer lasting results to. Interesting viewpoints, gentlemen.
 
Boycie83,

I have tried several blades now: Feather to start with because this blade works so well in my DE89, Gillette Yellow, Personna Red Israelie, and a Merkur.

Now think about that last blade, a Merkur. I even managed to cut myself with one them and they are considered one of the least sharp blades on the planet. It is very frutrating.

Some weepers have happened below the edges of the mouth, but I haven't had one of those now for a few days. However, where I do get cut, every time, is on the tip of the chin. I know this is a difficult area for many, but again, I can shave there with the DE89 sporting a Feather blade and not give it a second thought.
I've just taken some photos of the 3one6 against the DE89 and the GC 0.84 out of curiosity. Looking at the blade gaps, it looks like it would be easier to catch your chin with the incorrect angle using the 3one6 (I'm thinking when navigating the curvature). Forgive the quality of the photos - it's surprisingly hard to hold two razors steady in one hand.

I'm no expert in trigonometry and my advice could be way off the mark but hopefully these may useful in helping to overcome your chin cuts.

NB: The 3one6 is on the right in each photo. The gold razor is the DE89.
eb95e37dc8a735546a466b7451555ece.jpg
913c4af69068ac74a944a85c77a2b19f.jpg
934c6b5732b34d09f18ae6e761b24313.jpg
8b8654f87fee4b7a0ed406ef4eadc25b.jpg


Sent from my LYA-L09 using Tapatalk
 
I've just taken some photos of the 3one6 against the DE89 and the GC 0.84 out of curiosity. Looking at the blade gaps, it looks like it would be easier to catch your chin with the incorrect angle using the 3one6 (I'm thinking when navigating the curvature). Forgive the quality of the photos - it's surprisingly hard to hold two razors steady in one hand.

I'm no expert in trigonometry and my advice could be way off the mark but hopefully these may useful in helping to overcome your chin cuts.

NB: The 3one6 is on the right in each photo. The gold razor is the DE89.
eb95e37dc8a735546a466b7451555ece.jpg
913c4af69068ac74a944a85c77a2b19f.jpg
934c6b5732b34d09f18ae6e761b24313.jpg
8b8654f87fee4b7a0ed406ef4eadc25b.jpg


Sent from my LYA-L09 using Tapatalk
I've also just noticed how beautiful my hands are!

Sent from my LYA-L09 using Tapatalk
 
Just got back from the hospital today and looking forward to trying mine on Monday morning as I tend to shave every two days given that I don't go into an office or customer facing environment anymore. That and the fact that DE gives closer, longer lasting results to. Interesting viewpoints, gentlemen.
Good luck on the shave and I hope your hospital stay wasn't anything serious.

Cheers!
 
Boycie83,

I have tried several blades now: Feather to start with because this blade works so well in my DE89, Gillette Yellow, Personna Red Israelie, and a Merkur.

Now think about that last blade, a Merkur. I even managed to cut myself with one them and they are considered one of the least sharp blades on the planet. It is very frutrating.

Some weepers have happened below the edges of the mouth, but I haven't had one of those now for a few days. However, where I do get cut, every time, is on the tip of the chin. I know this is a difficult area for many, but again, I can shave there with the DE89 sporting a Feather blade and not give it a second thought.

I agree with Steve said about Merkur blades, and the other blades you used of Feather, Gillette Yellow & Personna Red are all top tier blades for sharpness, I nick myself using those blades in a Gillette Tech, which is as mild as it gets! I'd recommend trying some blades that are on the smoother side of things, eg Trig Silver Edge, Gillette Platinum, Treet Black to name a few.
 
I've just taken some photos of the 3one6 against the DE89 and the GC 0.84 out of curiosity. Looking at the blade gaps, it looks like it would be easier to catch your chin with the incorrect angle using the 3one6 (I'm thinking when navigating the curvature). Forgive the quality of the photos - it's surprisingly hard to hold two razors steady in one hand.

I'm no expert in trigonometry and my advice could be way off the mark but hopefully these may useful in helping to overcome your chin cuts.

NB: The 3one6 is on the right in each photo. The gold razor is the DE89.
eb95e37dc8a735546a466b7451555ece.jpg
913c4af69068ac74a944a85c77a2b19f.jpg
934c6b5732b34d09f18ae6e761b24313.jpg
8b8654f87fee4b7a0ed406ef4eadc25b.jpg


Sent from my LYA-L09 using Tapatalk
Yon Gold Barley EJ is stunning! Always fancied one of those.(y)
 
I agree with Steve said about Merkur blades, and the other blades you used of Feather, Gillette Yellow & Personna Red are all top tier blades for sharpness, I nick myself using those blades in a Gillette Tech, which is as mild as it gets! I'd recommend trying some blades that are on the smoother side of things, eg Trig Silver Edge, Gillette Platinum, Treet Black to name a few.
Absolutely. Some of the more "innocuous" blades, especially Indian ones and the beautifully-packaged ZaZa, are so smooth they won't cut butter, let alone whiskers. I find that the green Astra SP blades shave well, but are also good at taming some of the more unforgiving razors.
 
Back
Top Bottom